Your request

Contact data

WHAT THE XELECTRIX ENERGY STORAGE BOX DOES

Peak Shaving
The ability of the Power Box to reduce / eliminate load peaks utilizing battery power. Battery charging during low load periods.
Load Shifting
The ability of the Power Box to store and discharge power at selected times allowing the shifting of power away from higher tariff periods.
RE Optimization
The ability of the Power Box to optimize energy consumption and charge connected PV and wind supplies efficently.
Zero
Feed-In
Reduce your feed into the grid to zero! Increase your self-consumption from regenerative sources.
Peak
Power
Boost
The ability of the Power Box to suppliment power from other sources to meet high capacity peaks.
Backup Power
The ability of the Power Box to be used as on / off grid backup provider. Often replacing conventional Generator systems.
Genset Control
The ability of the Power Box to communicate with a generator and automatically switch it on / off at pre-programmed loads. Leading to massive fuel savings!
Black
Start
The ability of the Power Box to re-start an electric power station or part of an electric grid without relying on the external electric power.
Grid
Stabilization
The ability of the Power Box to stabilize network electricity using a variety of features.
Energy Trading
The ability of the Power Box to store energy at cheap rates and discharge when required during peak demand periods.
Micro
Grid
The ability of the Power Box to create a network independent energy supply which can also be supplimented by renewables.
LEC
The ability of the Power Box to facilitate independent energy storage and supply on a community level, especially in combination with PV.
Charging
The ability of the Power Box to act as an island style stress reliever for charging EV's and site equipment, even in areas with weak grid coverage.
Grid Connection
The ability of the Power Box to allow users to reduce grid connection rating and minimize costs.
Unbalance
Load
Acceptance
The ability of the Power Box to accept unbalance loads acorss three phase supply.
Island
Mode
Supplying the consumers directly from the Power Box.

Features

„Engineered in Austria“ – we are system designers, not system integrators.

ENERGY. ANYTIME. ANYWHERE.

PLUG & PLAY ENERGY STORAGE

Easy installation due to our Parallel Platform Technology (grid-parallel) so that with or without PV / water/ wind energy supply, it is simple to integrate the Power Box into existing electrical infrastructures.

Plug& Play
Safe energy storage systems

SAFE ENERGY STORAGE SYSTEM

By using LiFePO4 / LFP battery cells with an integrated thermally triggered extinguishing system, we set a completely new standard when it comes to safety.

LiFePO4 / LFP cells have a slightly lower energy density than other lithium-ion battery types, meaning that LFP cells are less prone to short circuits and overheating, and therefore have a lower risk of fire and explosion. In addition, LFP cells are thermally stable and have a longer service life, making them attractive for use in high-voltage power storage.

 

PARALLEL PLATFORM TECHNOLOGY

The Power Box can be combined with alternative energy sources and the grid / generator supply. In the event of higher energy requirements, our energy storage system adds the inverter output of the Power Box to the existing energy source. That's a Peak Power Boost!

Peak Power Boost
Modular energy storage

MODULAR & EXPANDABLE

We can offer you energy storage systems between 47 and 564 kWh storage capacity and
11 to 150 kW power. In order to achieve the required performance of our customers, our energy storages have been designed modularly. This provides flexibility and scalability as the system can be easily adapted to changing needs by adding or removing more modules.

UNIQUE BI-DIRECTIONAL HYBRID INVERTER

In-house designed interface technology allowing the Power Box to charge and discharge using only one inverter while offering features like Unbalanced Load Acceptance and Peak Power Boosting with PARALLEL PLATFORM TECHNOLOGY INSIDE. At the same time, the efficiency of the Power Box increases due to the omission of additional components when compared to conventional storage systems.

hybrid energy storage system
active battery management system

UNIQUE XELECTIX POWER ACTIVE BATTERY MANAGEMENT SYSTEM (aBMS)

The xelectrix aBMS increases energy efficiency by always keeping the cell voltage the same. It detects irregularities or temperature differences and can switch off these areas. This leads to a longer technical lifetime and higher system protection.

Active vs. passive BMS:

At higher compensating currents, the passive BMS extracts energy from the cells and is wasted in heat. The active BMS transfers energy between the cells - there are no losses.

MONITORING OF YOUR POWER BOX - XPMon

With xPMon you can control and monitor the operation of your xelectrix energy storage system. Monitoring allows you to monitor and optimize the performance of the system in order to maximize your own energy consumption and savings. In addition, the monitoring can also be used to indicate problems or errors in the system at an early stage, which facilitates maintenance and repairs. You can also use xPMon to switch to “blackout mode” in a targeted manner, such as in the case of announced power cuts.

xPMon
The xelectrix Power Box | Plug & Play Energy Storage Box